Adhesives 

Options 

We not only use the very latest equipment and technology but also the highest specification materials too.

Choosing the correct combination of substrate and adhesive is critical to the performance of the final label, badge or overlay we supply, so great care is taken to ensure we match exactly the right materials to your requirements.

With adhesive technology advancing at such a pace you can be almost certain to find just the right specification for your application. Substrates can also be tailored exactly to your needs but finding the right site can be difficult. 

To assist, we have tried to make life easier for you by listing a selection of links to manufacturers such as 3M, Fasson, Cadillac and GE etc where you can search directly for the specifications you need then download them.

Alternatively, because there are so many others you can always speak to a member of our technical sales team on 0844 4123245 for more practical help and knowledgeable advice on your particular project.

The most frequently asked questions often involve concerns about matching the right adhesive type to the substrate the label is being applied to.

Below is a very general guide to some of the more commonly used applications:

• Smooth flat surfaces: i.e. ABS, Aluminium, glass (interior applications) - general purpose (GP) adhesive should be suitable. 
• Smooth flat surfaces: i.e. ABS, Aluminium, glass (interior/exterior applications) 3M 467 (or equivalent). 
• Textured flat surfaces: i.e. ABS, Alumimium, glass (interior/exterior applications) 3M 468 (or equivalent). 
• Powder coated paints and Polypropylene mouldings: (interior or exterior) - Low Surface Energy (LSE) tapes will be necessary - 3M and Duplomont both provide an excellent range.
• Automotive applications: (interior/exterior badging) - these very often require a higher bond and more commonly thicker foam or neoprene tapes may be necessary - Lohman, Avery, 3M and others all offer good products.
• In transit or removable requirements: A wide range of 'peelable' adhesives are available with varying degrees of tackiness.

NB: Most adhesives available can be supplied either in sheet form or after being pre die-cut across our range of labelling products. All are permanent (where intended), waterproof and designed for non-porous substrates, most will generally be acrylic and pressure sensitive.

Samples of any stock adhesives can always be provided for your own testing purposes.  Please note any adhesion tests should only be checked after applying to a clean dust free surface and left to fully cure for between 12 - 18 hours.